Yes, with the sump is now back in his seat, ready to make his decisive contribution to the success of the project Asdu.
The sump and all its components in recent days have been thoroughly cleaned with water and hydrochloric acid (muriatic ed in the supermarket), rinsed thoroughly with fresh water and are now back in their place.
Actually only lacks the calcium reactor Korallin C1501 appeal but this was necessary for maintenance heavier. In fact, I had to cut cleanly through the bolts that held the lid of the reactor close to the body as completely rusty from the salt.
Also there was the bitter surprise to find the rotor of the pump (a EHEIM 1048) route. Both the ceramic shaft is the body of the impeller have given lump sum, making me think again that EHIEM pumps are indestructible.
The lack of calcium reactor in this early period of not maturing inficierà in the proper "functioning" of the tank because for quite a few months there will be no need to supplement the calcium in a manner so important because the reduced consumption of the tank.
I also took the opportunity to completely redo the wiring and timers of the pictures taken, more to really care for real need. It 's true that the pictures I used are not watertight, but already an initial inspection showed no signs of internal corrosion.
Instead, what signs they have already shown some time ago was one of two built-in timer Gewiss. At least one year showed no signs of life, with the opportunity I have replaced even though in reality I never served in anything considering that the movement in the tank is ensured by two pumps controlled by their electronic Turbelle Tunze controller.
In the picture the results of this week, order reigns in the sump, but for how long? Do not worry just the aquarium will begin to turn the order will go in my sump and will return to rule the casino!